WRC Kenya 2022
Watch WRC Sardinia, Italy
WRC 2022 Portugal!
Watch WRC 2022 Croatia!
Watch WRC 2022 Sweden!
WRC Monte-Carlo, Monaco
Final Event! WRC Rally Monza, Italy!
Watch WRC 2021 Spain highlights!

Hyper Legend highly modified mid-engine road racer    $13,000     For Sale by Owner

Winnipeg , MB

Hyper Legend highly modified mid-engine road racer

1996 Legend Chassis REG #3515. Power by Yamaha Viper 696cc Wheelbase stretched to 96 inches for awesome handling on road course. No twitching! Chassis and body widened 13 inches to accommodate tuned pipes and transverse mid-mount motor.

Rear wing and Front aluminum air dam. Windshield laid back against A-pillars. Chassis/cage much stronger than any stock Legend. Triangles everywhere you look. Chassis and all metal parts powdercoated.

Kirky aluminum seat. Pyrotech belts. Removable steering wheel. Five-gallon fuel cell. One-hour testing on car, engine and all components, so everything is fresh.

Front suspension inboard coil-over-shocks with mini sprint aluminum uprights and hubs. Ten-inch discs with Wilwood 4-piston calipers. Single Wilwood 4-piston caliper inboard at rear spool. Twin Wilwood master cylinders with balance bar.

Independent rear suspension from LeGrand Formula Ford. LeGrand aluminum uprights machined for VW sub axles and bearings. Uses special VW dune buggy CV joints with 42 degrees angularity. Inboard suspension at all four corners consists of a vertical rod pushing on butterfly arm which pushes on inboard INEX600 Carrera shock/coil. Ride height adjusted by vertical rods. Six positions on butterfly wings. Five custom built swaybars range from half-inch diameter up to one-inch diameter. All fit front or rear.

Power drives through Yamaha snowmobile VRT belt clutches to 530 chain sprocket arrangement allowing multiple final drive ratios by changing small sprocket or big sprocket. Solid spool in the center has two double-row high speed bearings. Power input on the right side of the spool from the big sprocket. Brake caliper on the left side of the spool squeezes drilled stainless steel disc with Wilwood caliper, same caliper as employed on front brakes.

3-seven inch-wide 13-inch Kaiser split aluminum wheels with Toyo 206/60R-13 86V RA1 at the rear. 3-six-inch wide 13-inch genuine LeGrand FF magnesium wheels with Toyo 185/60R-13 80V RA1 at the front.

MOTOR – No sound sweeter than a two-stroke triple at 8,000 rpm. EGT gauge on each exhaust pipe installed at the power valve. Water temp gauges for cool water flowing in at bottom and hot water coming out of head. Highly modified Ian Tomassi Mikuni carbs.

Viper 696 cc with new VForce reeds and Tim Bender triple tuned pipes. Tomassi modified head. Fresh, one hour running to test car. Motor had 650 miles on it when we bought it at auction, but we performed overhaul anyway. Estimate 170hp to 180hp. Built by Les Barton.

- 1 halfshaft with 2 new dune buggy CV joints installed. Another spare halfshaft without CVs.
- Big sprocket currently installed is 70-tooth. Also have new 60-tooth and new 80-tooth. Numerous small sprockets from 11-tooth to 15-tooth.
- Spare transverse shaft.
- 1 Spare Yamaha primary clutch and 2 spare ArcticCat secondary clutches for deeper gearing, but they need Yamaha splined hubs installed.
- Complete front suspension corner assembled and ready to install, with aluminum upright, hub and brake disc. Right or left.
- Complete rear suspension corner assembled and ready to install with LeGrand aluminum upright, VW bearings and stub axle. Right or left.
- Tonnes of brand new suspension pieces, aluminum arms, heim joints, etc.
- Spare ECU
- All four fiberglass fenders and 2 extra Viking fiberglass nose cones
- Spare windshield still in wraps
- Quick jack for rear bumper

TRAILER – 18-foot trailer has lots of workbench and shelves for parts and camping gear. Heavy heavy duty powdercoat frame and chassis. Two new axles with surge brakes on all four wheels. Five new wheels/tires. Enclosed. Drop tailgate ramp for easy loading.

DRIVING - Handles like a go-kart. Phenomenal. I spent 12 years and a small fortune building it. I proved I could build it. And I drove it fast for a few laps, so I’ve proven it works. So now I’m an old man and probably I should sell it before I get hurt. Severe spinal stenosis keeps me out of the car. Doc won’t sign med form. $13,000 CDN OBO. Will drop price if I keep trailer. Car in Winnipeg.

Ron Lyseng 204-654-3096 [email protected]

scam alert How to recognize scam. Click here to read

Published: Dec 31, 1969
This item is used
Ad id: 2237

Flag: report-as-sold spam miss-categorized abuse