Final Event! WRC Rally Monza, Italy!
Watch WRC 2021 Spain highlights!
WRC 2021 Finland!
Watch best of WRC Greece 2021!
WRC 2021 Belgium!
WRC 2021 Estonia!
WRC 2021 Kenya highlights!
Top 5 moments at Rally Italia Sardegna

2005 SRT4 -SCCA Speed World Challenge Touring Car    $15,000     Sold

Canmore, AB

*** Dropping price to $15,000. Have to move it. Smoking hot deal at this price. ***

2016 ST3 Alberta class champion car. Please see below for just some of the detail. I also have setup and track data sheets when the car ran pro. This is a LOT of car and with the right setup and tweaking (something I didn’t even begin to get into), I am convinced this car could knock off at least another 2 seconds at Castrol, and it has run a 1:25.7.

This SRT-4 was one of two cars built for the 2005 SCCA Speed World Challenge Touring Car series by 3R-Racing and originally driven by Dan Aweida. The car was professionally built from the ground up, starting with a “body in white” shell and with engineering and financial support from Dodge SRT Motorsports.
see build pics:

The car is very fast and very safe because of the build quality. This is a full on professional touring car build by a professional race team, 3R Racing n Colorado. Other than a few rubs here and there the car has never been wrecked to the point of causing damage to the tub or cage.

- World Challenge spec SRT-4 motor - stage 3 turbo upgrade
- 330 whp / 380 wtq
- Ron Davis Radiator with integrated oil cooler
- Body in white
- Pro-built cage with full seam welding and suspension point triangulation
- Front sub-frame and rear suspension pickup point relocation - optimized for lowered ride heights
- Dodge Motorsports supplied Roselli knuckles for improved roll center and steering angles
- 3-way Moton Motorsport shocks with camber plates. Rebuilt 3 yrs ago and re-valved by 3R Racing ($20K)
- Spherical bearings on all suspension points
- AP racing air jacks with air wand
- Nascar style rear sway bar - Speedway Engineering - adjustable
- Custom wiring harness
- Racetech driver's seat (medium) moved back behind B-pillar in typical pro touring car fashion
- 22 US gal fuel cell mounted midship with fabricated cover. *New replacement fuel cell installed prior to 2016 race season*
- Weldon main fuel pump with three lift pumps and collector
- Electric power steering motor mounted in trunk
- Carbon fiber - hood, trunk lid, wing, and splitter with integrated brake ducts
- Lexan windshield, side, and back windows
- Full Motec system – ($25K system) - 3-way g-sensor, shift lights, wideband O2 sensor, wheel speed sensors, suspension motion sensors, steering angle, brake pressure, brake bias, throttle pos, coolant temp, oil temp, intercooler in/out temps, with logging and graphing. Includes trackside beacon and software.
- Brembo Racing braking system designed by Brembo with adjustable f/r bias
- Tilton floor mounted pedals
- Affordable brake pads and rotors as Nascar takeoff pads are readily available on eBay
- 17”x8” OZ Superleggera wheels (3 sets)
- 1 set of mounted Hoosier R7 (used)
- 1 set of mounted Continental slicks (used)
- 1 set of mounted Toyo R888 for rain (used)
- 1 or 2 sets or unmounted sets good for track days
Lap times by amateur driver unless otherwise noted.
- Castrol – 1:25.7
- Sebring - 2:23
- Road Atlanta - 1:33 - (Randy Pobst driving in street close at HPDE even check out vid:
- VIR full course - 2:04
- Daytona – 2:02

• 1 front bumper cover
• 1 rear bumper cover
• 1 carbon fiber hood
• 1 carbon fiber splitter
• 1 left front fender
• 1 right front fender
• 1 Motec beacon (*cannot get this to work. Can upgrade to GPS*)
• 1 spare transmission with Quaife
• 1 modified front cross member per SWC rules
• 1 set of Lexan front door glass
• 1 Lexan windshield
• 1 Exhaust Depot Beast intercooler (no longer available)
• 8 spare OZ Superleggera wheels 17x8 silver
• 1 set of drive axles (rebuilt pair)
• 1 set of adjustable rear control arms (new)
• 1 rear spindle for use with 3R brackets
• 1 set of front rotors new with hats installed
• 1 set of Brembo rear rotors with hats installed
• 1 new front brake pads - PFC01
• 1 new rear brake pads - PFC97
• Box of springs (various rates)
• 2 Dodge Motorsports custom front knuckles
• Air jack wand
• Air jack stands

The car is currently in storage in Canmore, AB. Spares are located near Wetaskiwin, AB.


Road Atlanta - NARRA - WC SRT-4 - Randy - Feb 2011

1:32.9 lap

Published: Oct 4, 2017
This item is used
Ad id: 800

Flag: spam miss-categorized abuse